Package Care Limited

Health Care Industry


Human Meditek, South Korea – Plasma Sterilization


The Health Care division of PCL Solutions Ltd revolutionized the Sri Lankan low temperature sterilization sector by introducing the country’s first ever Plasma Sterilizer which sterilizes highly sophisticated, heat-sensitive surgical instruments at low temperatures safely.


PCL Solutions Ltd also offers total solutions for all kinds of other sterilization needs including high temperature steam sterilization, dry heat sterilization, air & liquid sterilization with UV and food sterilization.





Strong Lumen Claim


The HMTS plasma sterilizers have been validated for hard lumen with various sizes.


Speed cycle time


The HMTS plasma sterilizers offer faster cycle time of 35-40 minutes from the unique and outstanding technologies. The faster cycle enables your sterile storage and staffs organize daily schedule easy and bring you with the higher efficiency for your operation on time


Safe process and by-products


The HMTS plasma sterilizers provides you with its unique technology of cracking the residual hydrogen peroxide into oxygen and water, which fully guarantees safe for your staff as well as environment.


Sensible running cost


The HMTS plasma sterilizers have reasonable cost per cycle, excellent load efficiency (for its total volume), and you ultimately can save time and effort for its faster cycle time.





Width 29.5in (750mm)
Height 65.7in (1670mm)
Depth 32.9in (835mm)


947 lbs (430 kg)


5.7″ Touch Screen and Audible alarm & voice

Data management

32 MB memory card







Made in Korea



Rimec, Italy – Passive Rehabilitation.


From continuous passive motion machines, to heat sensitive thermo plastics, the Health Care division of PCL Solutions offers occupational therapists, physiotherapists, and orthotists and prosthetists revolutionary high tech products and materials to speed up rehabilitation.


Fisiotek LT passive mobilization of shoulder
Fisiotek 2000 E passive mobilization of kneehip
Fisiotek 2000 G/GS passive mobilization of kneehip
Fisiotek 2000 N passive mobilization of kneehip
Fisiotek 2000 T/TS passive mobilization of kneeanklehip
Fisiotek HP2 passive mobilization of shoulderelbowwrist
Hal3000 & AS20 plaster room
KR2000 orthopaedic first aid



RIMEC has been manufacturing equipment for passive mobilisation since 1987. Today RIMEC is acknowledged as one of the reference sector’s most qualified manufacturers.

This apparatus mobilizes the knee and hip through flexo-extension movement.



As is true for the other apparatuses in the Fisiotek 2000 line, a continuous current motor controlled by an electronic card with microprocessor operates it



Fisiotek LT





Fisiotek LT is an appliance that allows the shoulder to undergo passive mobilization with different movements. This model is characterised by its simplicity, ease of handling and quality of movement. Positioning of the patient is an easy and smooth operation.


Movements carried out for the shoulder


§                       Elevation during flexion, range: 0°÷ 180°

§                       Internal-external rotation, range: 90° ÷ 0° ÷ 90°

§                       Adduction-abduction: complete physiological range gineering data

§                       Input: 12V DC 50/60Hz – 4.8W

§                       Electric safety: Class II B Standard EN 60601-1

§                       Electromagnetic compatibility: Group 1 Class B Standard EN 60601-1-2

§                       Classification according to EU Directive 93/42: Class II a

§                       Weight: 20 Kg

§                       The instrument is compliant with the applicable Basic Requirements for safety, Health and protection established by EU Directive 93/42.


External power supply:


§                       Input: 100 ÷ 240 V AC – 50 ÷ 60 Hz

§                       400mA Output: 12V DC – 1.25A rogrammable function

§                       Speed

§                       Range of movement: adjustment by electromechanical limit switch.


Whenever joint movement needs to be restored passively in both surgical and non-surgical pathologies.

§                       because it is simple, manageable and easy to transport

§                       because it allows the patient to be easily positioned

§                       because it is stable and accurate

passive mobilization of kneehip

Fisiotek 2000 G / GS



These two apparatuses mobilize the knee and hip and through the flexo-extension movement..

As is true for the other apparatuses in the Fisiotek 2000 line, a continuous current motor controlled by an electronic card with microprocessor operates them. On the outside is a fixed keyboard with which each function can be programmed, and a movable keyboard that lets the patient stop and start the movement by using the STOP and START pushbuttons that have the same function as those on the fixed keyboard.

The limb positioning area is on the top of the apparatus. It can be adjusted depending on the various sizes of limbs. In order to adjust it, you must know the length of the patient’s femur. The apparatus can accept limbs having femur lengths of 32 to 46 centimetres, which correspond to a patient’s height of approximately 140 to 190 centimetres.

Engineering data

§                       Power supply: 85 ÷ 260V ~ 50÷60 Hz

§                       Electrical safety: Class I B EN 60601-1 Standard

§                       Electromagnetic compatibility: Group 1 Class B EN 60601-1-2 Standard

§                       Classification according to EU 93/42 Directive: Class IIa

§                       Weight: 14 kg

§                       Flexo-extension movement of the knee amplitude from -5° to 110°

§                       Extension speed from1,5 to 3,5°/sec.

§                       Flexion speed from 0.8 to 4.6°/sec.

§                       Force from 0 to 40 kg

§                       Work time

§                       Automatic angle of extension increase

§                       Automatic angle of flexion increase

§                       Pause during extension

§                       Pause during flexion

§                       Warm-up cycles (only Fisiotek 2000GS)



hen should it be used

§                       Protheses and ligamental plasties of the knee and ankle.

§                       Protheses of the hip and knee.

§                       Reparative surgery of the extensor apparatus of the knee.

§                       Hip and knee osteotomy.

§                       Re-education in arthral fractures of the hip and knee.

§                       Synovectomy.

§                       Simple arthrolysis or with broad muscular disinsertions.

§                       Meniscectomies and meniscus sutures

§                       Because it is a cutting edge instrument in the passive rehabilitation sector

§                       Because the completeness of the parameters available make it possible to personalise the rehabilitation session in the most optimum way.

§                       Because it uses the Memory Card (model GS)

§                       Because the special asymmetrical structure of the frame (right/left) grants easy and correct positioning of the patient’s limb so as to allow for true coincidence between the mechanical articulations and the patient’s joints. This way the mechanical stresses derived from the movement are discharged onto the mechanical part and not onto the joints. This makes the movement more comfortable and makes it easier for the patient to relax.



Website :

Made in Italy

Radiation Protection


Pulse Medical, USA – Radiation Protection


Teaming up with a leading manufacturer in USA – Pulse Medical Inc.,™ the Health Care Division of PCL Solutions provides high quality radiation protective accessories from a variety of Lead Aprons to the most high tech non lead Earth LITE – material which provides the same 98% attenuation as lead but light as a feather! The only Sri Lankan CDDA approved lead accessories marketed in Sri Lanka.












Web site :

Made in USA


Mosquito control


Aquatain, Australia – Mosquito Control


Teaming up with a innovative Australian manufacturer – Ultimate Agri Products with Auqtain Pte. Ltd the Health Care division was the first to introduce a “Non chemical action” product for mosquito control – Aquatain AMF™. The unique physical action of Aquatain kills mosquitoes in all stages of life. Aquatain is the only product which was tested by Medical Research Institute – Colombo ,National Aquatic Resources Agency and the University of Peradeniya.





What is Aquatain?

Aquatain is a unique silicone-based liquid which spreads across the water surface, forming a very thin film and greatly reducing evaporation .The concept of a monolayer is not new – it’s been known for many years that some industrial alcohols can reduce evaporation in this way, but alcohols degrade very quickly and must be re-applied every couple of days. Aquatain uses the same concept, but with advanced materials to greatly improve its performance and longevity. Aquatain can be used anywhere there is a requirement to reduce evaporation:


  • Drinking water storages
  • Farm dams
  • Mining dams
  • Golf courses
  • Even swimming pools!


What about the effect of waves and strong winds?

Wave action and strong winds can disturb the Aquatain film temporarily, but the silicone lattice will re-form when the wind drops


.Is Aquatain cost-effective?

Trials have confirmed that the water savings from using Aquatain far outweigh the costs. With water prices likely to escalate in many areas, Aquatain will become even more cost-effective


Environment & safety


Is Aquatain safe?

Yes, it is! Silicones are used in hundreds of applications including water-repellent sealers, hair conditioners and lipsticks. They are also used to reduce foam in commercial food applications and as non-stick sprays in the baking trade.


An independent water quality report has concluded that:


  • Aquatain added to the surface of water bodies does not affect the chemistry of the water
  • the film of Aquatain does not prevent the water from oxygenation
  • there is no evidence that aquatic life suffers a negative effect
  • Aquatain does not produce any effects that would be deleterious for potable water quality.


Apply Aquatain


How much Aquatain do I need to apply?


If applying Aquatain manually, we recommend an application rate of 2 litres per hectare every 10 days. If using a dosing unit (see below), the settings are calibrated to release approximately this amount.


What drum sizes are available?


Aquatain is available in:


  • 2.5 litre and 5 litre drums (selected stores only)
  • 20 litre drums
  • 110 litre drums
  • 200 litre drums
  • 1,000 litre IBCs


How do I apply Aquatain?


Aquatain can be applied by simply pouring it directly from the drum on to the water. It will spread rapidly across the surface.
However, to ensure regular dosing and to enable you to ‘set it and forget it’, two automatic dosing units are available:


The DS-1 is designed for storages with a surface area up to 1 hectare (10,000 square metres), and is operated by 2 x 1.5 volt batteries


The DS-2 is designed for larger storages, and is solar powered.


Each unit delivers a programmed dose at regular intervals.


DS-1 Dosing Unit DS-2 Dosing Unit


For storages greater than 20 hectares, aerial application is recommended.


Reports are available on request




Made in Australia


Mediburn, USA – Waste Management


The Health Care division was the first company in Sri Lanka to introduce portable dual chamber incinerators, manufactured by Elastec American Marine – USA


The Medi Burn is the ideal solution for customers who have limited space as it only requires an area of 3-meter radius and does not emit visible smoke.






SmartAsh – Cyclonic Barrel Burner


SmartAsh uses what is specified by ISO Standards as a removable head or “open-end” drum. The measurement of this drum type is standard around the world. ISO 15750, published in 2002, traditionally identifies this drum as being 55 American Gallon.


US Norm ANSI/ASC MH2-1985 • 22 1/2 in ± 1/16 I.D.

European Standard EN 209 • 571.5mm +1/-0.5 I.D.




Made in USA



Orfit, Belgium – Rehabilitation


Orfit Industries is a pioneer in inventing and manufacturing low temperature thermoplastics for the usage of physical rehabilitation, patient immobilization, and for the usage of Orthoses and Prosthetics.


Based in Belgium, Orfit exports their products to many countries in order to increase the quality of rehabilitation treatment, world wide.









Physical Rehabilitation


Orfit Industries develops and produces splinting materials that offer the highest possible performance to both therapists and patients in physical rehabilitation


Physical Rehabilitation-Splinting Materials




Aquafit NS Soft – The Beauty of Crystal White

General description


Aquafit NS has an exceptionally pleasing white surface. The material is suitable for a very wide product range. It is an excellent choice of splinting material for splints both large and small. When the coating is removed, all attachments can be placed with ease.






Orfit Eco – The Solution for Tight Budgets!



General description


Orfit Eco is extremely well suited for large and/ or rigid splint fabrication. It is a great product for elbow, forearm, wrist, ankle, and even back supports as well as anti-spasticity splints, long arm splints and lower extremity splints.


Splinting Accessories


Cogged Scissors


Cogged pair of scissors with return spring to cut sheets up to 3.2 mm (1/8″).


Art. no. : 35064




Deburring Knife


To smoothen splint edges. Ideal to finish splints made of non-perforated material in a fast and efficient way. Two blades are inside the handle.



Art. no. : 35307


Art. no. : 35307B10 (10 spare blades with straight cut)


Art. no. : 35307B20 (10 spare blades with oblique cut)






Accurate dynamometer, max. 600 g. Ideal to measure static and dynamic splint tractions. A ring is attached to one end, a clip to the other.



Art. no. : 35105


Eyelet Setter (Chrome Plated)


To set eyelets in leather, fixation straps and Orfit 1.6 mm (1/16″) and 2.0 mm (1/12″). Is supplied with 100 pieces of 7 mm (9/32″) eyelets.



Art. no. : 35134


Art. no. : 35137 – 200 eyelets of 4 mm (1/6″) diameter.




Spring Coil Pliers


Full round nosed pliers for turning spring wire into coil with a diameter from 5 mm (3/16″) to 10 mm (25/64″).


Art. no. : 35140




Strong Scissors


Strong cogged pair of scissors with return spring to cut sheets from 2.0 mm (1/12″) to 4.2 mm (3/16″).


Art. no. : 35065




Suspan 1


Large water bath in stainless steel. With electric thermostat, lid and water drainage. 3 set temperatures.


Temperature range : between 65°C (149°F) and 95°C (203°F).


Inner dimensions : 620 mm x 500 mm x 100 mm (24 3/5″ x 19 7/10″ x 4″).


Water content : approximately 20 l.


Art. no. : 35096




Suspan 2


Small water bath in stainless steel. With electric thermostat and lid.


Temperature range : between 65°C (149°F) and 95°C (203°F).


Inner dimensions : 500 mm x 295 mm x 100 mm (19 7/10″ x 11 3/5″ x 4″).


Water content : approximately 10 l.


Art. no. : 32500/0


Art. no. : 703011




Hook and Loop Tape




Padding – Edging Strip


Sizes : 3000 mm x 20 mm x 0.8 mm (118″ x 4/5″ x 1/31″).


(natural colour)




Padding – Luxofoam Non Perforated


Luxofoam is a self-adhesive soft PVC foam used for padding of small surfaces. It does not detach when heated in water, and can therefore be used for prepadded splint applications.


Sizes : 97 cm x 49 cm x 3 mm (38 x 1/5″ x 19 3/10″ x 1/8″).


Art. no. : 35110




Padding – Luxofoam Perforated


Luxofoam is a self-adhesive soft PVC foam used for padding of small surfaces. It does not detach when heated in water, and can therefore be used for prepadded splint applications.


Sizes : 97 cm x 49 cm x 3 mm (38 1/5″ x 19 3/10″ x 1/8″).


Art. no. : 35112




Padding – Orfilastic


Orfilastic is a terrycloth lining material with a backing of self-adhesive open cell foam. Used for covering large splint surfaces to prevent and absorb perspiration. Easily removable with lukewarm water.


Sizes : 100 cm x 50 cm x 3 mm (39 2/5″ x 19 7/10″ x 1/8″).




Made in Belgium